"Buy with Confidence" from BPMA Members

Resources

Europump position paper on the review of “Regulation (EU) No 547/2012”

  SEPTEMBER 2015Europump position paper on the review of “Regulation (EU) No 547/2012”Europump have been keen supporters of the European Commission in actively bringing into focus legislation concerning energy,...
Continue Reading

Category: Technical Information

Guideline on the application of COMMISSION REGULATION 641/2009 /EC and the amendment 622/2012/EUwith regard to ecodesign requirements for circulators

Guideline on the application of COMMISSION REGULATION 641/2009 /EC and the amendment 622/2012/EUwith regard to ecodesign requirements  for circulators IntroductionCommission Regulation (EC) 641/2009 and its...
Continue Reading

Category: Technical Information

BUILDING INFORMATION MODELLING (BIM)

  BUILDING INFORMATION MODELLING (BIM) - A Europump Guide The Pump industry has investigated the current requirements from the construction industry to achieve BIM Level 2 acceptance. The conclusion was to develop a...
Continue Reading

Category: Technical Information

PUMP VIBRATION STANDARDS GUIDELINES

  PUMP VIBRATION STANDARDS  - A Europump Guide The diversity of standards applicable to the pump industry is probably greater on the subject of vibration than any other field. These standards can appear to be...
Continue Reading

Category: Technical Information

EXTENDED PRODUCT APPROACH FOR PUMPS

  EXTENDED PRODUCT APPROACH FOR PUMPS - A Europump Guide Guideline on the application of Commission Regulation 641/2009/EC and the amendment 622/2012/EC with regard to eco design requirements for circulators ...
Continue Reading

Category: Technical Information

BPMA's 75th Anniversary Dinner
75 Years Celebrated in Style

To help celebrate three-quarters of a century serving the British pump industry, the BPMA recently staged a special Anniversary...
Continue Reading

Category: Events

Pump Working Pressure

Pumps require, in order to ensure trouble-free operation, a minimum static inlet pressure at the pump suction port, which is generally termed the minimum available net positive suction head (NPSH). This available inlet pressure decreases...
Continue Reading

Category: Pumping Fundamentals

Glanded (Dry-Motor) Pump

Design The uniform feature of glanded pumps is the separation between the pumped fluid and the drive motor. The connection between the impeller in the pump body and the motor is made by either a common shaft or by coupled shaft parts....
Continue Reading

Category: Pumping Fundamentals

| 1 2 3 4 |